10756

Addressable manual call point BP-FD-AMCP305

The BP-FD-AMCP305 Addressable manual call point (here in after referred to BP-FD-AMCP305 Addressable) is mainly designed to be used with an intelligent two-bus control system. If it is pressed after a fire is manually confirmed, an alarm signal may be sent to a fire alarm control system which will, after receiving the alarm signal, display the coded address and the equipment status of the manual fire call points. When the manual fire call points are operating normally, the red indicator will blink; when there is a fire alarm, it will remain lit. The BP-FD-AMCP305 Addressable supports electronic coding, more suitable for engineering application convenient.

      FEATURES

  • Semi-flush or surface mounting
  • Compatible with the latest EN standards
  • Lever reusable (non-glass break)
  • LED indicator
  • Full electronic coding
Buy now!

Specifications

Technical specification
Model: BP-FD-AMCP305
Technical Parameters
Operating Voltage Signal Loop 24V (18V 28V)

Power 24VDC (20VDC 28VDC)

Standby Current Loop 0.8mA; Power 2mA
Action Current Loop 5mA; Power 15mA
Output Capacity 1A@DC30V
Input Mode Setting NC or NO input mode can be set by the jumper JP4
Programming Method Electronically addressed
Code Range One address within 1~324
Indicators Inspection indicator: l blink once about every 12 seconds in the inspection status or remain lit in the output status;

Input indicator: remain lit in the feedback status.

Operating Temperature -10℃~+55
Relative Humidity ≤95%, non-condensing
Material of Enclosure ABS
Dimension (L×W×H) 86mm×86mm×41mm (with base)
Mounting Hole Distance 60.5mm
Weight About 148g (with base)

Downloads

Our brand partner bears sole responsibility for the information offered.

Service

Show service overview