10770

Addressable smoke detector BP-FD-ASD301

BP-FD-ASD301 addressable photoelectric smoke detector (Detector hereunder) is a kind of photoelectric smoke detector. With an internal microprocessor, it supports electronic coding and is accessed through BP-FD-ASD301 fire alarm control panel via a two-wire bus. The detector realizes real-time acquisition of the in-situ smoke concentration data and sends back the data to a fire alarm control panel. It can also receive and execute the control commands given by a fire alarm control panel.

The detector is suitable for such industrial and civil buildings that have a great deal of smoke during fires but no smoke under normal circumstances, such as restaurants, hotels, teaching buildings, office buildings, computer rooms, communication machine rooms, libraries and archives.

Buy now!

Specifications

Technical specification
Model: BP-FD-ASD301
Technical Parameters
Operating Voltage Loop 24V (18V ~ 28V)
Standby Current <0.3mA
Alarm Current <1.5mA (without remote indicator)

<3.5mA (with remote indicator

Fire LED Red, Flash in polling, and illuminate in alarming
Remote indicator output Polarity-sensitive output, directly connect to remote indicator (built in 10k resistor in series, max. output current is 2mA); The red indicator will blink in the monitoring status or remain lit in the alarm status
Programming Electronically addressed
Programming Range Occupying one address within 1 ~ 324
Wiring Loop: two wire, polarity-insensitive
Environmental Temperature -10℃ ~ +50℃
Relative Humidity ≤95%, non-condensing
Material of Enclosure ABS
Dimension Diameter: 100mm

Height: 58mm (with the base)

Mounting Hole Distance 44.5mm ~ 64.3mm
Weight About 128g (with the base)
Operating voltage Loop 24V (18V ~ 28V)

Downloads

Our brand partner bears sole responsibility for the information offered.

Service

Show service overview