Specifications
Technical specification
Model: BP-SWP-8EP2GL-120 | |
Interface Characteristics | |
Fixed port | 8*10/100Base-TX PoE ports (Data/Power)
2*10/100/1000Base-T uplink RJ45 ports (Data) |
Ethernet port | Port 1-8 can support 10/100Base-T X auto detect, port 9-10 can support 10/100/1000Base-T auto detect, full / half duplex MDI / MDI-X adaptive |
Twisted pair transmission | 10BASE-T: Cat3,4,5 UTP (≤250 meter)
100BASE-TX: Cat5 or later UTP (≤100 meter) 1000BASE-T: Cat5e or later UTP (≤100 meter) |
Functional switch | 1*(Extend)
Note: when the switch state changes, it must be restarted before the PoE switch function can take effect |
Chip Parameter | |
Network protocol | IEEE802.3 10BASE-T, IEEE802.3i 10Base-T
IEEE802.3u 100Base-TX,IEEE802.3x |
Forwarding mode | Store and Forward (Full Wire Speed) |
Switching Capacity | 11.8Gbps (Non-blocking) |
Forwarding
Rate@64byte |
4.17Mpps |
MAC | 3k |
Buffer Memory | 2M |
LED Indicator | Power: PWR (green), network: Link (yellow), PoE: PoE (green)
Functional switch: EXTEND (green) |
PoE & Power | |
PoE Port | Port 1 to 8 |
Power supply Pin | Default 1/2(+), 3/6(-) |
Max Power per Port | 30W, IEEE802.3af/at |
Total PWR / Input Voltage | 120W/ (AC100-240V) |
Power Consumption | Standby <5W, Full load <120W |
Power Supply | Built-in power supply, AC100~240V 50-60Hz 2.2A |
Physical Parameter | |
Operation TEMP / Humidity | -20⁰C ~ +55°C; 5% ~ 90%, RH Non condensing |
Storage TEMP / Humidity | -40⁰C ~ +75°C; 5% ~ 95%, RH Non condensing |
Dimension (L*W*H) | 195*130*40mm |
Net /Gross Weight | <0.8kg / <1.2kg |
Installation | Desktop, wall mounted |
Certification & Warranty | |
Lightning protection / protection level | Lightning protection: 4KV 8/20us; Protection level: IP30 |
Certification | CCC, CE mark, commercial, CE/LVD EN60950
FCC Part 15 Class B, RoHS |
Warranty | 1-year, lifelong maintenance |