10655

26-port gigabit uplink al PoE switch BP-SWP-24EP2GL1GF-250

DESCRIPTION

BP-SWP-24EP2GL1GF-250 is an unmanaged AI PoE switch. It has 24*10/100M PoE ports and 2*10/100/1000M uplink RJ45 ports and 1*1000Base-X SFP fiber port (combo port). Port 1-24 can support IEEE802.3af/at standard PoE power supply, and single port PoE power reaches 30W. The maximum PoE output power is 250W. Port 1-24 can support the PoE watchdog function. When the port communication failure corresponds to the port POE will automatically restart, self-recover network communication, reducing manual intervention and maintenance. As a PoE power supply device, it can automatically detect and recognize the power receiving equipment that meets the standard and supply power through the network cable. It can supply power to POE terminal equipment such as wireless AP, webcam, VoIP, video access control, etc. through the network cable, to meet the network environment that needs high-density PoE power supply. It is suitable for hotels, campuses, parks, banks, hospitals, factories, small and medium-sized enterprises form a cost-effective network.

Unmanaged model, plug and play, no configuration, easy to use.

Buy now!

Specifications

Technical specification
Model:  BP-SWP-24EP2GL1GF
Interface Characteristics
Fixed port 24*10/100Base-TX PoE ports (Data/Power)

2*10/100/1000Base-T uplink RJ45 ports (Data)

1*1000Base-X SFP fiber port (Data) (combo port)

Ethernet port Port 1-24 support 10/100Base-TX, port 25-26 support 10/100/1000Base-T(X) automatic detection, full/half Duplex MDI/MDI-X adaptive
Twisted pair transmission 10BASE-T: Cat5 UTP (≤250 meter)

100BASE-TX: Cat5 or later UTP (≤100 meter)

100BASE-T: Cat5e or later UTP (≤100 meter)

SFP Slot Port Gigabit SFP optical fiber interface, default not matching optical modules (optional order single-mode / multi-mode, single fiber / dual fiber optical module. LC)
Optical Cable/ Distance Multi-mode: 850nm /0 ~ 500M, single mode: 1310nm /0 ~ 40KM, 1550nm /0 ~ 120KM
Functional Switch v  (E, D, P) Three levels, the default state is “OFF”, the function description is as follows after “ON” is turned on

v  E is the “ON” state, port 9-16/17-24 can support long-distance transmission 10M/250m and VLAN transmission mode; when “OFF”, 100 meters transmission

v  D is the “ON” state, port 1-16/1-24 can support AI self-healing mode; when “OFF”, no communication self-healing function

v  P is the “ON” state, POE outputs total power and priority indication mode; when “OFF”, no power indication function

Chip Parameter
Network protocol IEEE802.3 10BASE-T, IEEE802.3i 10Base-T, IEEE802.3u 100Base-TX

IEEE802.3ab 1000Base-T, IEEE802.3z 1000Base-X, IEEE802.3x

Forwarding mode Store and Forward (Full Wire Speed)
Switching Capacity 14.8Gbps(non-blocking)
Forwarding

Rate@64byte

6.55Mpps
MAC 16K
Buffer Memory 4M
Jumbo Frame 10K
LED Indicator Power: PWR (green), Network: link (yellow), PoE: PoE (green). Rrate:1000M (green)
PoE & Power
PoE Port Port 1 to 24 IEEE802.3af/at @ POE
Power supply Pin Default 1/2 (+), 3/6 (-), Optional 4/5(+), 7/8(-)
Max Power per Port 30W, IEEE802.3af/at
Total PWR / Input Voltage 250W (100-240V)
Power Consumption Standby <20W, Full load <250W
Power Supply Built-in switching power supply, AC 100 ~ 240V 50-60Hz 4.1A
Physical Parameter
Operation TEMP / Humidity -20⁰C ~ +55°C; 5% ~ 90%, RH Non condensing
Storage TEMP / Humidity -40⁰C ~ +75°C; 5% ~ 95%, RH Non condensing
Dimension (L*W*H) 330*204*44mm
Net /Gross Weight <2.3kg / <3kg
Installation Desktop, wall mounted, 19-inch 1U cabinet
Certification & Warranty
Lightning protection / protection level Lightning protection: 4KV 8/20us, Protection level: IP30
Certification CCC, CE mark, commercial, CE/LVD EN60950, FCC Part 15 Class B, RoHS
Warranty 1-year, lifelong maintenance

Downloads

Our brand partner bears sole responsibility for the information offered.

Service

Show service overview