10775

2-wire addressable sounder beacon BP-FD-ASIR307

BP-FD-ASIR307 Intelligent Sounder Beacon can give audible after being connected to a bus loop. It can be used with a bus-type fire alarm control panel. After receiving a start command given by the fire alarm control panel following an accident, the Sounder Beacon will begin to work. At this moment, the Sounder Beacon will give a harsh audible alarm signal, to remind the persons on the scene of the accident, the fact that a fire has occurred on the site, quickly and necessity to take related evacuation measures, thus preventing the fire accident from becoming a major one.

The Sounder Beacon may be used to give audible alarms at the scenes of accidents. It is applicable to places like high-rise residential buildings, public places, hotels, amusement buildings, factories, shopping centers, hospitals, schools, office buildings and stock exchanges, and particularly to the places with a low visibility or the possibility of generation of smoke.

Buy now!

Specifications

Technical specification
Model: BP-FD-ASIR307
Technical Parameters
Loop input DC24V (18-28V), ≤1Ma (monitoring status), ≤3mA (alarm status)
Power input DC24V (20-28V), ≤4mA (monitoring status), ≤130mA (alarm status)
Power consumption ≤3.2W@DC24V
EN54-23 Coverage C-3-8/W-2.4-6(coverage volume see the following figures)
Flash Color and Frequency White, 0.5Hz
Light Output Synchronization Meets EN54-23
Sound Level See the following table ”Sound Level Data”
Ingress Protection Rating IPC21C
Operating Temperature -10℃ ~ +50℃
Relative Humidity ≤95%, non-condensing
Material of Lens/Body Flame retardant PC/ABS
Dimension ф100mm×100.5mm (with the base)
Mounting Hole Spacing 45mm ~ 70mm
Weight About 270g (with the base)
Loop input DC24V (18-28V), ≤1mA (monitoring status), ≤3mA (alarm status)

Downloads

Our brand partner bears sole responsibility for the information offered.

Service

Show service overview