10655
26-port gigabit uplink al PoE switch BP-SWP-24EP2GL1GF-250
DESCRIPTION
BP-SWP-24EP2GL1GF-250 is an unmanaged AI PoE switch. It has 24*10/100M PoE ports and 2*10/100/1000M uplink RJ45 ports and 1*1000Base-X SFP fiber port (combo port). Port 1-24 can support IEEE802.3af/at standard PoE power supply, and single port PoE power reaches 30W. The maximum PoE output power is 250W. Port 1-24 can support the PoE watchdog function. When the port communication failure corresponds to the port POE will automatically restart, self-recover network communication, reducing manual intervention and maintenance. As a PoE power supply device, it can automatically detect and recognize the power receiving equipment that meets the standard and supply power through the network cable. It can supply power to POE terminal equipment such as wireless AP, webcam, VoIP, video access control, etc. through the network cable, to meet the network environment that needs high-density PoE power supply. It is suitable for hotels, campuses, parks, banks, hospitals, factories, small and medium-sized enterprises form a cost-effective network.
Unmanaged model, plug and play, no configuration, easy to use.
Specifications
Technical specification
| Model: BP-SWP-24EP2GL1GF | |
| Interface Characteristics | |
| Fixed port | 24*10/100Base-TX PoE ports (Data/Power)
2*10/100/1000Base-T uplink RJ45 ports (Data) 1*1000Base-X SFP fiber port (Data) (combo port) |
| Ethernet port | Port 1-24 support 10/100Base-TX, port 25-26 support 10/100/1000Base-T(X) automatic detection, full/half Duplex MDI/MDI-X adaptive |
| Twisted pair transmission | 10BASE-T: Cat5 UTP (≤250 meter)
100BASE-TX: Cat5 or later UTP (≤100 meter) 100BASE-T: Cat5e or later UTP (≤100 meter) |
| SFP Slot Port | Gigabit SFP optical fiber interface, default not matching optical modules (optional order single-mode / multi-mode, single fiber / dual fiber optical module. LC) |
| Optical Cable/ Distance | Multi-mode: 850nm /0 ~ 500M, single mode: 1310nm /0 ~ 40KM, 1550nm /0 ~ 120KM |
| Functional Switch | v (E, D, P) Three levels, the default state is “OFF”, the function description is as follows after “ON” is turned on
v E is the “ON” state, port 9-16/17-24 can support long-distance transmission 10M/250m and VLAN transmission mode; when “OFF”, 100 meters transmission v D is the “ON” state, port 1-16/1-24 can support AI self-healing mode; when “OFF”, no communication self-healing function v P is the “ON” state, POE outputs total power and priority indication mode; when “OFF”, no power indication function |
| Chip Parameter | |
| Network protocol | IEEE802.3 10BASE-T, IEEE802.3i 10Base-T, IEEE802.3u 100Base-TX
IEEE802.3ab 1000Base-T, IEEE802.3z 1000Base-X, IEEE802.3x |
| Forwarding mode | Store and Forward (Full Wire Speed) |
| Switching Capacity | 14.8Gbps(non-blocking) |
| Forwarding
Rate@64byte |
6.55Mpps |
| MAC | 16K |
| Buffer Memory | 4M |
| Jumbo Frame | 10K |
| LED Indicator | Power: PWR (green), Network: link (yellow), PoE: PoE (green). Rrate:1000M (green) |
| PoE & Power | |
| PoE Port | Port 1 to 24 IEEE802.3af/at @ POE |
| Power supply Pin | Default 1/2 (+), 3/6 (-), Optional 4/5(+), 7/8(-) |
| Max Power per Port | 30W, IEEE802.3af/at |
| Total PWR / Input Voltage | 250W (100-240V) |
| Power Consumption | Standby <20W, Full load <250W |
| Power Supply | Built-in switching power supply, AC 100 ~ 240V 50-60Hz 4.1A |
| Physical Parameter | |
| Operation TEMP / Humidity | -20⁰C ~ +55°C; 5% ~ 90%, RH Non condensing |
| Storage TEMP / Humidity | -40⁰C ~ +75°C; 5% ~ 95%, RH Non condensing |
| Dimension (L*W*H) | 330*204*44mm |
| Net /Gross Weight | <2.3kg / <3kg |
| Installation | Desktop, wall mounted, 19-inch 1U cabinet |
| Certification & Warranty | |
| Lightning protection / protection level | Lightning protection: 4KV 8/20us, Protection level: IP30 |
| Certification | CCC, CE mark, commercial, CE/LVD EN60950, FCC Part 15 Class B, RoHS |
| Warranty | 1-year, lifelong maintenance |
