10777

Addressable I/O module BP-FD-AIO319

The BP-FD-AIO319 Addressable I/O Module is used with BP-FD-ACP300-1L fire alarm control panel. It is mainly used to realize an output control for fire linkage equipment (such as smoke dampers, blow valves and fire dampers) and receive the feedback signals of the fire linkage equipment so that a judgment on whether or not the fire linkage equipment is operating normally can be done.

Buy now!

Specifications

Technical specification
Model: BP-FD-AIO319
Technical Parameters
Operating Voltage Signal Loop 24V (18V 28V)

Power 24VDC (20VDC 28VDC)

Standby Current Loop < 0.8mA; Power < 2mA
Action Current Loop <5mA; Power < 15mA
Output Capacity 1A@DC30V
Input Mode Setting NC or NO input mode can be set by the jumper JP4
Programming Method Electronically addressed
Code Range One address within 1~324
Indicators Inspection indicator: l blink once about every 12 seconds in the inspection status or remain lit in the output status;

Input indicator: remain lit in the feedback status.

Operating Temperature -10⁰C ~ +55⁰C
Relative Humidity ≤95%, non-condensing
Material of Enclosure ABS
Dimension (L×W×H) 86mm×86mm×41mm (with base)
Mounting Hole Distance 60.5mm
Weight About 148g (with base)

Downloads

Our brand partner bears sole responsibility for the information offered.

Service

Show service overview