02146
Dual-tech sensor BP-PIRMW01
- Detection distance: 12m / 25°C
- Power supply voltage: DC9-16V
- Working current: ≤45mA
- Maximum coverage area: 12m x 12m / 90°
- Alarm output: Reed switch, normally closed
- Less than 100mA / 30V, -10Ω internal impedance
- Wall or corner installation, the installation height is 1.8 ~ 2.4m above the ground
Specifications
Technical specification
| Specifications | |
| Model | BP-PIRMW01 |
| Detection distance | 12m / 25°C |
| Power supply voltage | DC9-16V |
| Working current | ≤45mA |
| Infrared area | 89 |
| Maximum coverage area | 12m x 12m / 90° |
| Alarm and Tamper | |
| Alarm output | Reed switch, normally closed
Less than 100mA / 30V, -10Ω internal impedance |
| Tamper-proof interface | Normally closed, 50mA / 30VDC |
| Alarm output duration | 2s |
| Alarm indication | |
| Yellow light | Microwave triggered alarm |
| Green light | Infrared triggered alarm |
| Red light | Alarm indication |
| Power-on self-test time | In 60 seconds, three indicators flash one by one during the self-test |
| Fault Prompt | |
| Preheating failure | Yellow light flashes 4 times within 5s |
| PIR signal failure | Green light flashes 3 times within 5s |
| MW signal failure | Yellow light flashes twice quickly within 5s |
| Working environment | |
| Indoor temperature | -10°C ~ +55°C |
| Anti-white light interference (indoor) | ≥6500LUX |
| Anti-radiation interference | 30V / m, 10MHz – 1000MHz |
| Appearance size (L*W*H without bracket) | 124*71*41.5mm |
