A dual voice coil speaker offers wiring flexibility with its two voice coils. It allows single speaker to output both stereo channels through one speaker, creating a stereo sound from a single speaker location. GTW 11204 D is a dual voice coil speaker offers wiring flexibility with its two voice coils. It allows single speaker to output both stereo channels through one speaker, creating a stereo sound from a single speaker location.
Highlight
Frequency
A woofer is a speaker in your system that handles low-frequency audio signals. The GTW 11204 D offers a frequency range of 32-800 Hz, which will improve your listening experience when playing your favourite song.
Sensitivity
Your GTW 11204 D’s capability to convert power (watts) into volume is indicated by its sensitivity rating (decibels). Your speakers’ volume will increase as the sensitivity rating rises up to 82 dB.
Impedance
Impedance is a measurement of a woofer’s voice coil’s resistance to the amplifier-supplied audio current. GTW 11204 D has a 4 ohm resistance, thus the music it produces will be fascinating.
SPECIFICATION
WIRING DIAGRAM
Installation
Sealed Enclosure
Vented Enclosure
Specifications
GTW 11204 D Specifications
- Nominal Diameter : 12”
- Power Handling (RMS) : 225 watts
- Power Handling (max) : 675 watts
- Impedance : 4ohms
- Sensitivity : 82 dB @ 2.83V/1m
- Frequency Response : 32 – 800 Hz
- Voice Coil Diameter : 49.5mm
- Magnet Weight : 50 Oz
- DC Resistance (Re) : 3.6 Ohms
- Resonant Frequency (Fs) : 37 Hz
- Mechanical Q (Qms) : 2.325
- Electromagnetic Q (Qes) : 1.787
- Total Q (Qts) : 1.01
- Diaphragm Mass Inc. Airload (Mms) : 200g
- Mechanical Compliance of Suspension (Cms) : 87.466u M/N
- Surface Area Of Cone (Sd) : 50.671m m²
- BL Product (BL) : 9.895 Tm
- Compliance Equivalent Volume (Vas) : 31.890m m²
- Maximum Linear Excursion (Xmax) : 10 mm
- Cone / Diaphragm Material : Paper / aluminium
- Surround Material : Rubber
- Voice Coil Wire Material : Copper
- Voice Coil Former : aluminium
- Basket/Frame Material : Steel
- Magnet Material : Ferrite
- Overall Outside Diameter : 12.36″
- Overall Depth : 5.75″
- Baffle Cut-out Diameter : 10.95″
- No. of Mounting Holes : 8
- Mounting Hole Diameter : 11.61″(295mm)
- Size & Weight : 314x314x146mm & 3.63kg
