MP 68 processor allows you to maximize the audio performance system by establishing a connection between the source unit and the amplifier. The musical signal output from the source unit goes into the Digital Signal Processor (DSP) then it gets sent to the amplifier. DPS can do so many improvements with the signal before sending it to the amplifier, such as crossovers, equalizers, line output and converters. DSP converts all these units into one.
DSP offers perfect time allignment. Despite the speakers that are located at different distances in the vehicle, DPS is able to measure the distance from the listener or the driver to prevent skewed sound track and make sure all sound coming from the speakers are the same
Specifications
Specifications
- Inputs : 6x RCA/Aux-in, 6 Highlevel Speaker Input, x Optical SPDIF (12 – 96kHz), 1x Remote-in, 1x COAX-in, 1x Aux-in (3.5mm JACK)
- Input sensitivity : RCA/Cinch 400mv 1x COAX-in, Highlevel 5 – 10 Volts or 10 – 20Volts
- Outputs : 8x RCA/Cinch, 1x Remote-out
- Output votlage RCA/Cinch : > 5 Volts RMS
- Frequency response : 20Hz – 22kHz
- DSP resolution : 32 bit
- DSP power : 295MHz (1.2 billion MAC operations/Second)
- Sampling rate : 48kHz
- Signal converters A/D : BurrBrown
- Signal converters D/A : BurrBrown
- Signal-to-noise ratio digital input : 105dB (A-weighted)
- Signal-to-noise ratio analog input : 100dB (A-weighted)
- Distortion (THD) : <0.015%
- Damping factor : >70
- Input impedance : 22kOhms
- Input impedance highlevel : 200Ohms
- Operating voltage : 9 – 15 Volts (max. 5 sec. down to 6 Volts)
- Dimensions (L x W x H) : 180 x 130 x 39mm
